塑料粉碎機的啟動和關閉
瀏覽：86 發表時間：2016-08-12 16:46:00
1. 塑料粉碎機的啟動與關閉 Start and turn off the machine
1）啟動前檢查粉碎機料筒和切削室里沒有物料！
Make sure there are no materials in the charging barrel and cutting chamber before staring the granulator.
2）啟動粉碎機，按下啟動按鈕。
Start the granulator, press the start button.
3）當啟動按鈕彈起后，粉碎機已經啟動起來，可以準備工作。
When the start button pops up, the granulator has been started up and ready to work.
注：如果沒有啟動粉碎機，請按照后面常見問題檢查。
Note: if fail to start the granulator, check the machine by referring to the FAQs below.
2）關閉機器 Turn off the machine
1）停止往粉碎機料筒里投料，等到粉碎機里面塑料完全粉碎掉。
Stop feeding materials to the charging barrel, wait until the plastics inside the granulator completed crushed.
注：這樣的習慣對機器長期可靠使用特別重要
Note: such habit is important for the long-term and reliable use of the machine.
2）停機操作，按下停止按鈕。
Shutdown operation, press the stop button.
3）機器算完全停機了。
The machine is completely shutdown.
